Stories & How To's

How To Use a Sage & Braker Modifiable Bore Cleaning Kit to Clean Your Firearms

  • By Fred Bohm

How To Use a Sage & Braker Modifiable Bore Cleaning Kit to Clean Your Firearms

Sage & Braker is always striving to provide you with the fastest, easiest and the most thorough way of cleaning and keeping your firearms in top condition.  Adding our shotgun and rifle Modifiable Bore Cleaning Kits to your gun cleaning supplies allows you to do just that. It's without a doubt one of the most essential tools to help you protect and maintain your firearms.

Unlike other boresnakes on the market that incorporate bristles in the buffing rope portion, we give you options when it comes to cleaning your firearm's bore.

There are three ways to use your Modifiable Bore Cleaning Kit when cleaning your firearms.

  1. Fully assembled; pull cord, bore brush and buffing rope
  2. Just the brush attached to the pull cord
  3. Just the buffing rope attached to the pull cord

This is a quick overview to get you started using your Sage & Braker Modifiable Bore Cleaning Kit.

 

bore cleaning kit for firearms

 

Your Modifiable Bore Cleaning Kit comes in rugged canvas sack with its caliber or gauge printed on it for easy identification. It comes fully assemble and ready to use as a complete bore cleaning kit.

 

gun brush for gun cleaning supplies

 

There are three main parts to your modifiable bore cleaning kit. The pull cord, the bronze phosphorous brush and the buffing rope. Each section is identified with its caliber or gauge.

 

boresnake for gun cleaning

 

 

How to Disassemble Your Modifiable Bore Cleaning Kit

 

Unscrew the brass collar in order to remove the brush from the pull cord and buffing rope.

  1. Unscrew the brass collar
  2. Twist the male connector so the pin is in the main slot
  3. Pull apart

 

 Step One

Sage and Braker Modifiable Bore Cleaning Kit

 

Step Two

Sage & Braker Modifiable Bore Cleaning Kit

 

Step Three

how to use boresnake

 

 

How to Assemble Your Modifiable Bore Cleaning Kit

 

As you might of guessed, just reverse the disassembly process. This is where you can decide which way you want to use your Modifiable Bore Cleaning Kit.

You can assemble the whole unit or just the brush. Or if you just want to attach the buffing rope to the pull cord and use that as a stand alone, you can do that as well as shown here.

 

Gun cleaning products for firearm bore

 

Three options for a custom way to clean your gun's bore.

 

Sage and Braker Modifiable Bore Cleaning kits

 

Our firearms are our legacies. They are more than just tools, they are vessels for our memories and traditions. Sage & Braker's sole purpose is to help you preserve and maintain your firearms so they can be enjoyed for generations to come. We're here to help with that in any way possible, so don't hesitate to reach out to us with any questions!

 

Written by Fred Bohm

Share this
Older Post Newer Post